Jump to letter: [
9ABCDEFGHIJKLMNOPQRSTUVWXYZ
]
mkinitrd: Creates an initial ramdisk image for preloading modules.
| Name: | mkinitrd |
Vendor: | Scientific Linux |
| Version: | 5.1.19.6 |
License: | GPL |
| Release: | 44 |
URL: | |
- Summary
- Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
images. These ramdisk images are often used to preload the block
device modules (SCSI or RAID) needed to access the root filesystem.
In other words, generic kernels can be built without drivers for any
SCSI adapters which load the SCSI driver as a module. Since the
kernel needs to read those modules, but in this case it isn't able to
address the SCSI adapter, an initial ramdisk is used. The initial
ramdisk is loaded by the operating system loader (normally LILO) and
is available to the kernel as soon as the ramdisk is loaded. The
ramdisk image loads the proper SCSI adapter and allows the kernel to
mount the root filesystem. The mkinitrd program creates such a
ramdisk using information found in the /etc/modules.conf file.
Changelog
- * Wed Dec 17 16:00:00 2008 Peter Jones <pjones{%}redhat{*}com> - 5.1.19.6-44
- Include dm-raid45 and related modules if dmraid is in use.
Resolves: rhbz#476866
- * Mon Dec 15 16:00:00 2008 Peter Jones <pjones{%}redhat{*}com> - 5.1.19.6-43
- Fix option passing in mountCommand
Resolves: rhbz#476537
- * Wed Dec 10 16:00:00 2008 Peter Jones <pjones{%}redhat{*}com> - 5.1.19.6-42
- Remove error message from failed stabilization on /proc/scsi/scsi
Resolves: rhbz#464636